|
Timewave |
|
DSP-D300 |
|
ALERT/IFLOWS Data Decoder |
|
The Timewave DSP-D300 decodes Automated Local Evaluation in Real Time (ALERT) data. Timewave’s advanced digital signal processing technology increases accuracy and reduces noise for today’s applications and establishes a platform for the improved protocols of the future. Ethernet + USB + Serial I/O The DSP-D300 plugs into the internet! If you have internet access on a network at a site, the DSP-D300 gives you remote data transfer, configuration and status. You can stream data to multiple IP addresses simultaneously. Most current systems use the rapidly-disappearing RS-232 serial technology for control and data transfer. The multiple I/O protocols of the DSP-D300 let you extend the life of those legacy systems as you upgrade the system with new components. No more worries about whether a new laptop computer has an RS-232 serial port! The USB port handles all the control, configuration and diagnostics. You can even update the internal program of the DSP-D300 in the field. Address Filtering and Packet Error Detection The DSP-D300 includes configuration software to set the entire range of 8,192 remote addresses and filters via the local USB port or via SSH secure internet protocol. If you’re using a satellite uplink, internal error detection eliminates noisy bad packets. Internet security Federal guidelines call for secure internet communications no matter what other advantages an internet-enabled system has. |
|
The DSP-D300 meets the challenge with the SSH 2.0 protocol for control and status communications. Flexible Installation The freestanding housing features a rugged aluminum extruded housing and EMI-blocking conductive paint. Single or dual rack mount and NEMA options make installation quick and easy. Two units can mount side-by-side with an optional 19 inch rack mount kit. The DSP-D300 features readily available standard connectors on all input and output ports. Field Diagnostics The installation and diagnostics software package included with the DSP-D300 allows you to measure the output level of the receiver to optimize the receiver and DSP-D300 settings during installation. You can test the operation of the DSP-D300 in the field with just the DSPD300 and a computer with a sound card. |
|
Features · Low noise DSP demodulator · Packet error detection · Handles 8192 data addresses & filters · Network enabled · SSH Secure internet protocol · Remote configuration and status · Field configuration and diagnostics · Field firmware update · USB port · 10/100 Ethernet port · Two RS-232 serial ports · Transformer-isolated receive data · Encoding option available |
|
1025 Selby Ave., Suite 101, St. Paul, MN 55104-6533 USA • 651-489-5080 Voice • 651-489-5066 Fax http://www.timewave.com E-mail: sales@timewave.com |
|
|